In this guide, we will show you the steps to flash the stock firmware on your LG phone via the LG Flash Tool. While the OEM doesn’t have the kind of stronghold that it had at the beginning of this decade, yet its offering is still quite impressive. Plus it also has managed to retain quite a few loyal fanbases, thereby creating its own niche segment of sorts. Likewise, it also isn’t afraid to try their hands on experimenting devices. The LG Velvet and Wing are two perfect examples of the same.
On the same lines, the device has adequate support for custom development. Once you have unlocked the device boot loader, you can flash tons of rom or recover as you like TWRP. Then you can also access the partition of the system by digging it through Magisk. This allows you to flash Magisk modules, and tons of other mods. However, if you end up installing an incompatible binary, then the device can enter a boot loop or get a soft one.
How to Flash Firmware on LG Phones Using LG Flash Tool
Before we list out the instructions, there are a few requirements that need to be met from your end. So head over to the below requirements section and make sure to get all the required files.
Prérequis
- To begin with, download the stock firmware for your LG device. You could do so from the LG Software and Firmware page. Make sure that the firmware is in KDZ or CAB format.
- Next up, download and install the LG USB Drivers on your PC, corresponding to your device.
- Finally, download the LG Flash Tool. This software will be used to flash the firmware onto your device.
That’s it. These were all the requirements. You may now proceed ahead with the steps to flash the stock firmware on your LG phone via the LG Flash Tool.
Instruction Steps
- extracts the contents of the LG Flash tool to a convenient location on your PC.
Then double-click your EXE file to launch the tool. Once the tool is launched, go to the select type option and select CDMA in the menu. - now click the search File button, navigate to the downloaded stock firmware file and select it.
- Next up, click on the Normal Flash button situated at the bottom.
- You should be taken to the Phone Information section, click on the Start button at the bottom right.
- Select the Country to which your firmware belongs to and then select the Language of your choice.
- Once you have made the selection, click OK. The flashing process will now begin.
- You could keep a track of the same from the progress bar. Do keep in mind that you might see a few question marks, that is completely normal and nothing to worry about
10. As soon as the progress is complete, your device will automatically reboot. When that happens, you may disconnect the device from the PC and close the tool as well.
With this, we conclude the guide on how to flash the stock firmware on your LG phone via the LG Flash Tool. If you have any queries, do let us know in the comments section below.
0 Comments